Fixed method of Split Core Current Transformers

Aug 28, 2021|

1. Fix with precise positioning screws: the fixed screws are locked by two precise positioning screws with a 90° gap. In the traditional fixing method, the front end of the screw touches the shaft, which is likely to cause damage to the shaft or make it impossible to disassemble or assemble.


2. Fix with clamping screws: use the tightening force of hexagon socket anchor bolts to close the gap, and clamp the shaft of the open-close current transformer. This kind of method is helpful for fixing and disassembling, and it is not easy to cause damage to the pivot.


3. Kind groove fixed: suitable for high torque transmission system. In order to avoid dragging the shaft diameter, it is generally combined with precision positioning screw fixation and clamping screw fixation.


4. D hole fixation: If the motor shaft is D-shaped, if the fixed screw cannot be fixed, the hole drilling current transformer can be produced and processed into a D hole corresponding to the specifications of the motor shaft, and fixed with a fixed screw, so Worry about deviation.


5. Fixing of the expansion sleeve: Tighten the four precise positioning screws on the end surface to clamp the sleeve, which is suitable for connecting and fixing some large torque servo motors and AC servo motors.


Send Inquiry