How to prevent grounding faults on the secondary side of current transformers?
Jan 31, 2025| 1. Correct installation and connection
Grounding wire installation specifications
Choose a suitable wire: When installing the grounding wire, choose a suitable wire based on the rated capacity of the current transformer, working environment and other factors. Generally speaking, a copper wire with a cross-sectional area of not less than 4 square millimeters should be selected to ensure good conductivity. For some special environments, such as places with strong electromagnetic interference or corrosion, consider using a grounding wire with a shielding layer or a material with better corrosion resistance.
Firm connection: Ensure that the connection between the grounding wire and the grounding terminal is firm and reliable. When connecting, use a suitable connection tool, such as a torque wrench, to tighten the nut according to the specified torque to prevent the connection from loosening. At the same time, the connection part should be treated with rust prevention, such as applying conductive paste or using galvanized connection accessories to reduce the possibility of oxidation and corrosion.
Reasonable setting of grounding terminals
Location selection: The location of the grounding terminal should be convenient for installation and maintenance. It is usually set close to the secondary terminal of the current transformer to shorten the grounding path and reduce the grounding resistance. During the installation process, ensure that there is good insulation between the grounding terminal and the equipment housing and other metal parts to avoid accidental short circuits.
Quality requirements: Select grounding terminals of qualified quality, and their materials should have good conductivity and corrosion resistance. For example, copper or stainless steel grounding terminals are used, and the design of the terminals must comply with electrical safety standards and be able to withstand the expected grounding current.
2. Regular maintenance and inspection
Appearance inspection
Frequency of grounding wire inspection: Regularly (such as monthly or quarterly) perform an appearance inspection of the grounding wire on the secondary side of the current transformer. Check whether the wire has signs of damage, breakage, aging, etc. Pay special attention to checking whether the insulation sheath of the wire is intact, especially when the wire passes through areas that are susceptible to mechanical damage, such as the edges and channels of the equipment.
Grounding terminal maintenance: Check the status of the grounding terminal at the same time. Check whether the terminal is corroded, oxidized, loose, etc. If slight corrosion is found on the surface of the terminal, it can be gently polished with sandpaper, and then protective oil can be applied for maintenance. For loose terminals, tighten the connection nuts in time.
Grounding resistance measurement
Measurement cycle: Measure the grounding resistance of the secondary side of the current transformer regularly (such as every year). Use a professional grounding resistance tester and operate according to the correct test method. Compare the measurement results with the specified standard value (generally required to be less than 10 ohms). If the grounding resistance is found to increase, find the cause and deal with it in time.
Record and track: Record the measurement results of each grounding resistance and create a file. By analyzing historical data, the trend of grounding resistance changes can be discovered in time and preventive measures can be taken in advance. For example, if the grounding resistance shows a gradual upward trend, it may indicate that there are potential problems in the grounding system and further inspection is required.
3. Improve the working environment
Moisture-proof measures
Sealing treatment: For current transformers installed in humid environments, good sealing should be done. Check whether the sealing gasket of the transformer is intact. If damaged, replace it in time. A waterproof cover or sealed box can be added to the outside of the transformer to prevent moisture from entering. For example, for transformers in basements or outdoors, a sealed box with good waterproof performance is used, and a desiccant is placed in the box to reduce humidity.
Temperature control: Keep the temperature of the working environment within a suitable range. Avoid current transformers in high or low temperature environments for a long time, because extreme temperature changes will accelerate the aging of insulating materials and corrosion of grounding terminals. In high temperature environments, the temperature can be lowered by installing heat dissipation devices such as fans or radiators; in cold environments, insulation measures should be taken to prevent the equipment from freezing and cracking.
Electromagnetic interference protection
Reasonable layout: During the design of the power system and the installation of equipment, the layout of the current transformer and other large electrical equipment (such as transformers, motors, etc.) should be considered. Try to avoid installing the current transformer near a strong electromagnetic field source, or set up an electromagnetic shielding device between them. For example, in a substation, the location of the equipment is reasonably planned, the current transformer is kept at a certain distance from the large transformer, and a metal shielding net is used to reduce electromagnetic interference.
Shielded grounding: If electromagnetic interference cannot be avoided, the secondary grounding system of the current transformer can be shielded and grounded. Use a metal shielding layer to wrap the grounding wire and ground the shielding layer well to guide and eliminate the induced current generated by external electromagnetic interference to ensure the normal operation of the grounding system.


