Introduction of Current Transformer Verification Equipment

Sep 28, 2022|

The transformer calibrator, as its name implies, is used to detect the error between the standard current transformer and the current transformer being verified.

 

The current booster should be used in conjunction with the voltage regulator to produce various test currents for verification. The greater the current demand, the higher the capacity of the current booster, and the higher the price.

 

The function of the load box is very single, and it is used to simulate the real working condition of the tested transformer.

 

The function of the high-current cable is very simple. It is used to connect the current. The cable used for the high-current connection must be of better quality.

 

Voltage regulator: used to adjust the current used for testing manufactured by the current booster, usually installed in a workbench with a protection switch, etc., divided into two voltage regulators for coarse adjustment and fine adjustment to ensure that the adjustment fineness is not less than The working standard of the certified current transformer.

 

The selection of the regulator should be selected according to the rated current. For example, when the rated current is below 3000 amperes, it is only necessary to use a voltage regulator with a rated capacity of 10. If it is also used for measurement at a larger rated current , it needs to be specially customized, and the rated capacity of the voltage regulator is customized. Generally, the rated capacity of the customized voltage regulator will not be less than 30.


Send Inquiry