Introduction to the classification of current transformers

Nov 25, 2022|

According to the insulating medium:

1. Gas-insulated current transformer: gas is used as the insulating value.

2. Casting current transformer: This current transformer has excellent sealing performance, adopts a pillar type fully enclosed structure, and the primary and secondary windings and the iron core are cast with epoxy resin.

3. Dry-type current transformer: It is mainly made of ordinary organic insulating material as its insulating medium. This current transformer product is oil-free and air-free, and has good fire performance to avoid accidents caused by high arcing.

4. Oil-immersed current transformers: The biggest difference from dry-type current transformers is that insulating oil is used as the insulating medium, which is more suitable for outdoor use than other current transformers.

By installation method:

1. Through-type current transformer: This type of current transformer is easy to install, does not need to remove the busbar once, and can be operated with electricity.

2. Pillar-type current transformer: The biggest difference from the through-type current transformer is that the installation place is mainly on the plane or pillar.

3. Bushing-type current transformer: The bushing-type current transformer uses high-quality silicon steel sheet as the magnetic conductive material, which has the characteristics of high measurement accuracy and is suitable for the measurement and protection of power system distribution lines.

4. Bus-type current transformer: This current transformer can be directly installed on the bus-bar, and the primary winding is connected through the core, which is safe, reliable and easy to operate.

Divided by principle:

1. Electromagnetic current transformer: It is a current transformer that uses the principle of fluxgate to realize current transformation. It is widely used in the system control and detection of electrical equipment in petroleum, chemical, railway, communication, coal mining and other industries.

2. Electronic current transformer: The electronic current transformer has good insulation performance, good anti-electromagnetic interference performance, and large dynamic range. It adopts a new structural scheme, with reasonable structure, small size and light weight.


Send Inquiry