-

2020-10-09What should be paid attention to during the operation of current transformer
1. The secondary side of the current transformer must not be open during operation. Once the secondary side is opened, the insulation may be damaged due to excessive iron loss or high temperature, or -

2020-10-07Why is the current transformer burnt out during use?
There are many reasons for the current transformer to burn out. The following are the most common reasons. The current transformer is turned on for the second time, generating a high voltage, causing -

2020-10-05Current transformer use precautions
1. Generally speaking, the connection of the current transformer is connected according to the minus polarity, so the polarity connection must be correct. Once the connection is wrong, the measurement -

2020-10-02Principles of current transformer wiring
1, no open circuit is allowed. The secondary open circuit can easily lead to safety accidents, because the secondary open circuit will cause the iron core to overheat and induce high voltage. 2. There -

2020-9-30How to use zero sequence residual current transformer
A current transformer can be installed on each of the three-phase lines, or the three-phase wires can pass through a zero-sequence current transformer together, or a zero-sequence current transformer -

2020-9-28Current transformer failure problem
1) The insulation of the current transformer is very thick, and some insulation is loosely wrapped, and there are wrinkles between the insulation layers. In addition, the vacuum treatment is poor, and -

2020-9-25How to deal with the smoke from the voltage transformer?
If the voltage transformer is smoked, it will emit smoke and have a strong odor; the voltage of the insulation monitoring meter may decrease, the indication of the voltmeter, active and reactive power -

2020-9-23Correct use method of current transformer
1. The wiring of the current transformer should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, and the secondary winding should be -

2020-9-21How to avoid burning of current transformer?
Install a circuit breaker first to avoid branch faults from affecting the entire line of power outages, especially to ensure that the branch circuit breakers can be reliably tripped. Then connect the -

2020-9-18Working principle of current transformer
The principle of current transformer is based on the principle of electromagnetic induction. The current transformer is composed of a closed core and windings. Its primary winding has a few turns, whi -

2020-9-16Statistics on the causes of current transformer failure
1) The insulation of the current transformer is very thick, and some insulation is loosely wrapped, and there are wrinkles between the insulation layers. In addition, poor vacuum treatment and incompl -

2020-9-14What is the role of current transformer
The current transformer is based on the principle of electromagnetic induction. The current transformer is composed of a closed core and windings. The primary winding has very few turns and is stringe


