-

2020-6-19What should be paid attention to when installing residual current transformer
-

2020-6-17Operation, maintenance and management of residual current transformer
-

2020-6-15How to choose the Residual (Zero Sequence)Current Transformer?
-

2020-6-12What is a Hall sensor
The Hall effect is a basic method for studying the performance of semiconductor materials, and the Hall sensor is a magnetic field sensor made based on the Hall effect -

2020-6-10How to prevent and reduce the burning of user current transformers?
The current transformer is burned because the current transformer is opened twice, which generates a high voltage, which burns the current transformer. -

2020-6-08The reasons for the residual current transformer being burned are those
The residual current transformer can convert the primary current with a large value to a secondary current with a small value through a certain transformation ratio -

2020-6-05What are the standards for selecting residual current transformers
Residual current transformer is a classification of transformers, also known as zero-sequence current transformers. Residual current transformers are widely used in production and life -

2020-6-03Principle of residual current transformer protection
The reason why the residual current transformer can have a protection function during operation is that it can make the sum of the complex current flowing to any node in the circuit be zero. -

2020-6-01What should be paid attention to when installing residual current transformer
When installing the residual current transformer, the PE line and the N line must be strictly distinguished. The PE line cannot be connected to the residual current transformer. -

2020-5-29Will the residual current circuit breaker use current transformers?
When a large current is opened, a strong arc is generated, and the breaking current of the circuit breaker depends on its arc extinguishing ability. -

2020-5-27How to prevent current transformer explosion
Check whether the lead connector in the primary terminal of the transformer is in good contact The primary terminal lead joint of the current transformer must be in good contact -

2020-5-25Operation, maintenance and management of residual current transformer
After the residual current transformer is put into operation, the user unit shall establish operation records and corresponding management systems


