How does the split core current transformer's performance change with aging?
Nov 14, 2026| As a seasoned supplier of split core current transformers, I've witnessed firsthand the evolution and performance intricacies of these essential electrical devices over time. Split core current transformers are widely used for current measurement, protection, and control in various electrical systems, from industrial power networks to residential buildings. One of the critical concerns that often arise in our discussions with customers is how the performance of these transformers changes with aging. In this blog, I'll delve into the factors that influence the aging process of split core current transformers and how it impacts their performance.


Understanding Split Core Current Transformers
Before we explore the impact of aging, let's briefly understand what split core current transformers are. Unlike traditional current transformers, split core current transformers feature a design that allows them to be installed around a conductor without the need to disconnect the circuit. This makes them highly convenient for retrofitting existing electrical systems or for temporary installations. These transformers work on the principle of electromagnetic induction, where the primary current flowing through the conductor induces a secondary current in the transformer's winding, which is proportional to the primary current.
Factors Affecting the Aging of Split Core Current Transformers
1. Thermal Stress
One of the primary factors that contribute to the aging of split core current transformers is thermal stress. During normal operation, the transformer generates heat due to the resistance of the winding and the core losses. Over time, continuous exposure to high temperatures can cause the insulation materials to degrade, leading to a reduction in their dielectric strength. This can result in increased leakage currents, which not only affect the accuracy of the current measurement but also pose a safety risk.
2. Mechanical Stress
Mechanical stress can also have a significant impact on the aging of split core current transformers. These transformers are often subjected to vibrations, shocks, and mechanical forces during installation, operation, and transportation. Over time, these mechanical stresses can cause the core laminations to loosen, the winding to shift, or the insulation to crack. Any changes in the physical structure of the transformer can affect its magnetic properties and, consequently, its performance.
3. Environmental Factors
The environment in which the split core current transformers operate plays a crucial role in their aging process. Exposure to moisture, humidity, dust, and corrosive substances can accelerate the degradation of the insulation materials and the metal components. For example, moisture can penetrate the insulation, leading to the formation of conductive paths and reducing the insulation resistance. Corrosive substances can cause the metal parts to rust, which can weaken the mechanical structure of the transformer and affect its electrical performance.
4. Electrical Overloads
Electrical overloads are another factor that can contribute to the aging of split core current transformers. When the primary current exceeds the rated capacity of the transformer for an extended period, it can cause excessive heating, which accelerates the degradation of the insulation and the core materials. Overloads can also lead to magnetic saturation, where the core can no longer accurately transform the current, resulting in distorted secondary currents and inaccurate measurements.
Performance Changes with Aging
1. Accuracy Degradation
One of the most significant performance changes that occur with the aging of split core current transformers is the degradation of accuracy. As the insulation materials degrade and the core properties change, the transformer's ratio error and phase angle error may increase. Ratio error refers to the difference between the actual and the nominal transformation ratio of the transformer, while phase angle error refers to the phase shift between the primary and the secondary currents. An increase in these errors can lead to inaccurate current measurements, which can have serious consequences in applications where precise current monitoring is required, such as in power management and energy metering systems.
2. Reduced Insulation Resistance
Aging can also lead to a reduction in the insulation resistance of the transformer. As mentioned earlier, factors such as thermal stress, moisture, and electrical overloads can cause the insulation materials to degrade, resulting in a decrease in their ability to resist the flow of electrical current. A lower insulation resistance can increase the leakage currents, which not only affects the accuracy of the measurement but also poses a safety hazard. In extreme cases, insulation failure can occur, leading to short circuits and equipment damage.
3. Increased Temperature Rise
With aging, split core current transformers may experience an increased temperature rise during operation. This can be due to several factors, including the degradation of the insulation materials, which reduces their ability to dissipate heat effectively, and the increased resistance of the winding due to aging. An elevated temperature can further accelerate the aging process, creating a vicious cycle that can ultimately lead to the failure of the transformer.
4. Mechanical Failure
Over time, the mechanical components of the split core current transformers may also fail due to aging. Loose core laminations, cracked insulation, or damaged winding can cause the transformer to malfunction or even break down completely. Mechanical failures can be particularly dangerous as they can lead to electrical faults and pose a risk to personnel and equipment.
Mitigating the Effects of Aging
To ensure the long-term performance and reliability of split core current transformers, it is essential to take proactive measures to mitigate the effects of aging. Here are some strategies that we recommend:
1. Regular Maintenance and Inspection
Regular maintenance and inspection of split core current transformers can help detect early signs of aging and prevent potential failures. This includes checking the insulation resistance, temperature rise, and accuracy of the transformers at regular intervals. Any abnormalities should be addressed promptly to avoid further deterioration of the performance.
2. Proper Installation and Operation
Proper installation and operation of split core current transformers are crucial for their long-term performance. They should be installed in a clean, dry, and well-ventilated environment to minimize the effects of environmental factors. Additionally, the transformers should be operated within their rated capacity to avoid electrical overloads.
3. Use of High-Quality Materials
At our company, we use high-quality materials in the manufacturing of our split core current transformers to ensure their durability and performance. For example, we use high-grade insulation materials that are resistant to thermal and mechanical stress, and we carefully select the core materials to ensure their magnetic properties remain stable over time.
Our Product Range
We offer a wide range of split core current transformers that are designed to meet the diverse needs of our customers. Some of our popular products include:
- Class 0.5 Flexible Split Core CT 5A Output For Cable & Busbar LO-FLSP: This flexible split core CT is suitable for both cable and busbar applications, offering high accuracy and excellent performance.
- Waterproof Split Core CT For Public Infrastructure Monitoring LO-CTHW8: Ideal for outdoor and harsh environments, this waterproof split core CT is designed to withstand moisture and other environmental factors.
- Current Transformers With Split Core: Our standard split core current transformers are reliable and cost-effective solutions for various electrical measurement and control applications.
Contact Us for Purchase and Discussion
If you're interested in learning more about our split core current transformers or have any questions regarding their performance, aging, or application, we encourage you to contact us. Our team of experts is always ready to provide you with detailed information and technical support to help you make the right choice for your specific needs.

