Busbar Puncture Rogowski Coil Current Sensor
Our flexible Rogowski coils revolutionize current measurement with their lightweight, non-invasive design. Engineered for versatility, these coils effortlessly wrap around conductors of any shape or size—even in cramped or complex installations—eliminating the need for circuit interruption. Unlike traditional rigid current transformers, they offer unparalleled adaptability, high accuracy across a broad frequency range, and exceptional linearity for both AC and transient current monitoring.
- Product Introduction
Wuxi Liou Electronics Co.,Ltd is one of the leading manufacturers and suppliers of busbar puncture rogowski coil current sensor in China. Our factory offer high quality customized products made in China with low price. Welcome to contact us for quotation.
>Product overview
Flexible Rogowski coil current sensor is used to measure AC current, especially high current. Because of its flexible characteristics, it can be used to measure the conductor current with large size (such as conductor diameter >30CM) or irregular shape or narrow space between conductors (for example, when the traditional clamp current probe can not measure, the flexible Rogowski coil current sensor can be used to measure conveniently). The former is plug-in type, which is used for temporary measurement of portable instrument or current, and for on-line long-time measurement of current. lt is easy to install without damaging the conductor.
>Technical parameters
Maximum withstand voltage:0.66kv (customized for special requirements)
Rated primary current: 10A~300kA
Rated secondary output: 4V,1A (A.C) or 4~20mA (D.C)
Accuracy: 1%
Rated auxiliary power supply: ± 12V,24V,5V D.C or 220V A.C
Rated power consumption: s 10W, working frequency 1HZ-1MH
Note: 1. Other specifications can be customized according to the specific requirements of customers.
>Electrical specifications
|
Electrical specifications |
|
|
10%-100% Accuracy |
5% (without integrator) 1% (plus integrator, 45-65HZ) |
|
Phase error |
W ± 1° (45-65HZ) W±10° (20KHZ) |
|
10%-100% Linearity |
0.50% |
|
Integrator power supply |
7-30VDC |
|
Response bandwidth |
1HZ-1MHZ |
|
Coil section diameter |
W7.6,W10,W12mm or Custom made |
|
Coil length |
2M or Custom made |
|
Altitude |
2000M |
|
IP Protection level |
IP65 |
|
Compressive strength |
2KVAC/min |
|
Insulation resistance |
DC500V/100MQ |
|
Voltage range of puncture |
10V-380V |
|
Temperature sensor range |
10K-100K |
|
P/N |
INPUT (A) |
Output |
Accuracy |
DIMENSIONS(mm) |
|
|
Φ1 |
Φ2 |
||||
|
LO-CTLSF |
0-300KA |
100mV 50mV 4-20mADC 0-5V 0-1A Customized |
1.0 5.0 |
92.4 |
7.6 10 12 |
|
100 |
|||||
|
150 |
|||||
|
200 |
|||||
|
400 |
|||||
>Dimensions:
LO-CTLSF BUSBAR PUNCTURING ROGOWSKI COIL
Wuxi Liou Electronics Co Ltd
Hot Tags: busbar puncture rogowski coil current sensor, China, manufacturers, customized, quotation, low price, made in China
