High Voltage Transformer Used For X-ray Monitor Machine Filament Transformer
Filament transformer used for X-ray machine
- Product Introduction
Wuxi Liou Electronics Co.,Ltd is one of the leading manufacturers and suppliers of high voltage transformer used for x-ray monitor machine filament transformer in China. Our factory offer high quality customized products made in China with low price. Welcome to contact us for quotation.
Filament transformer used for X-ray machine
In the filament circuit of the X-ray generator, step-down transformers are used to increase the heating current applied to the filaments of the cathode for thermionic emission.
FILAMENT CIRCUIT
o supplies power to the filament of the x-ray tubeso that the filament supplies enough electrons bythermionic emission.
o Modifies incoming linepower toproducethermionic emission from the filament wire.
o Filament circuit adjusts to mA ratings (50,100,200, etc.)
o After mA selection,current sent to step downtransformer to modify amps that reach.



Winding specs
S/N | Start | Finish | Current | Turns | Winding spec | Insulation layer | Voltage |
T1 | 1 | 2 | 0.5A | 40 | Wind closely | 2 | 200V |
T2 | 3 | 4 | 5A | 2 | Wind evenly | 1 | 160KV |
ELECTRICAL SPECIFICATIONS:
S/N | ITEMS | TERMINALS | SPECS | TEST INSTRUMENT |
2 | INDUCTANCE | 1-2 | L=6mH±10% | LCR METER 1KHz 1.25V |
4 | HI-POT TEST | T1-CORE
| AC2.5KV 1mA 60s |
BHP-505VO |
5 | I.R | P-S | >1000MΩ DC500V |
The filament transformer is located in the oil tank :

Hot Tags: high voltage transformer used for x-ray monitor machine filament transformer, China, manufacturers, customized, quotation, low price, made in China, Planar Transformer 28.2V Lo-Plt8088-008, Planar Transformer 28 2V Lo Plt8088 008, Planar Transformer, Planar Transformer Forward Topology 100W, Forward Topology Planar Transformer 180W














