video

2000A High Precision Closed Loop Hall Effect Current Transducer

The LO-HACL-2000LFA is a high-precision, closed-loop Hall-effect current sensor engineered for accurate DC, AC and pulse current measurement.

  • Product Introduction

Wuxi Liou Electronics Co.,Ltd is one of the leading manufacturers and suppliers of 2000a high precision closed loop hall effect current transducer in China. Our factory offer high quality customized products made in China with low price. Welcome to contact us for quotation.

 

567

 

LO-HACL-2000LFA Series Closed Loop Mode Hall Effect Current Transducer

The LO-HACL-2000LFA is a high-precision, closed-loop Hall-effect current sensor engineered for accurate DC, AC and pulse current measurement. It supports a nominal input of ±2 000 A (up to ±2 800 A) and produces a proportional ±400 mA output (1 : 5 000 turns ratio) with excellent linearity (≤0.10 % FS) and low offset drift (≤±0.75 mA over –25 °C to +85 °C). Thanks to its fast response time (<1 μs at 100 A/μs), wide bandwidth (DC–200 kHz) and dielectric strength of 6 kV (50 Hz, 60 s), it delivers reliable, insertion-loss-free performance even in electrically noisy environments. Typical applications include photovoltaic systems, general-purpose inverters, variable-speed drives, battery-supplied equipment, uninterruptible power supplies and switched-mode power supplies

 

 

Product Features:

  • Excellent accuracy
  • Very good linearity
  • Optimized response time
  • No insertion losses
  • High immunity to external interference
  • Low temperature drift

 

Application:

  • Photovoltaic equipment
  • General Purpose Inverters
  • AC/DC Variable Speed Drivers
  • Battery Supplied Applications
  • Uninterruptible Power Supplies
  • Switched Mode Power Supplies

 

Electric Specifications

P/N

Items

LO-HACL-2000LFA

Unit

Rated input (Ipn)

±2000

A

Measuring range (Ip)

±2800(±24V,2.0Ω)

A

Rated output current(Isn)

±400±0.2%FS

mA

Turns ratio (Np/Ns)

1:5000

T

Measure resistor with ±15V

@±2000Amax 1.0(max)

Ω

Measure resistor with ±24V

@±2000Amax 20(max)

Ω

@±2800Amax 2.0(max)

Secondary DCR@70℃

40

Ω

Supply voltage

±15~±24

V

Power consumption current

≤20+IpX(Np/Ns)

mA

Zero offset current

≤±0.20 @Ip=0

mA

Offset Current Temperature Drift

≤±0.5 (Typ) ≤±0.75 (Max) @-25℃~+85℃

mA

Linearity

≤0.10 @Ip=0-±Ipn

%FS

Di/dt following precision

>100

A/us

Response time

<1.0 @100A/μ S,10%-90%

us

Band width

DC-200 @-3dB

KHz

Dielectric strength

AC6KV 50Hz 60s

KV

 

 

Instructions:

1.Incorrect wiring may cause the damage of sensor.

2.When the measured current through the center hole of the sensor, the current will be measured at the output end.

3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.

4.User can adjust the output extent of sensor if necessary.

5.Rated input current and output voltage of sensor can be customized.

 

Standards:

  • IEC61010-1
  • EN50178
  • IEC61800-5-1
  • UL94V-0
  • RoHS Reach

 

Operating Conditions

 

Value

Unit

Symbol

Operating temperature

-40℃~+85℃

℃

TA

Storage temperature

40℃~+125℃

℃

TA

Weight(Appro)

1820

g

M

 

Dimensions:

 

568

Connection Schematic:

For Bidirectional current measurement:

111

 

For Unidirectional current measurement:

112

Output signal performance:

 

45

 

Wuxi Liou Electronics Co Ltd

Hot Tags: 2000a high precision closed loop hall effect current transducer, China, manufacturers, customized, quotation, low price, made in China, Closed Loop Hall Effect Sensors, Closed Loop Hall Effect High Current Sensor, Hall Effect Sensor

Send Inquiry

(0/10)

clearall