ACS770xCB Hall effect based linear sensor IC Substitute
Hall Effect-based linear current sensor SCT Series Descriptions: The SCT Current sensor ICs family provides economical andprecise solutions for ACor DCcurrent sensing.Typical applications include motor control, load detection andmanagement, power supply and DC-to-DC converter control,inverter...
- Product Introduction
Wuxi Liou Electronics Co.,Ltd is one of the leading manufacturers and suppliers of acs770xcb hall effect based linear sensor ic substitute in China. Our factory offer high quality customized products made in China with low price. Welcome to contact us for quotation.
Hall Effect-based linear current sensor SCT Series
Descriptions:
The SCT Current sensor ICs family provides economical andprecise solutions for ACor DCcurrent sensing.Typical applications include motor control, load detection andmanagement, power supply and DC-to-DC converter control,inverter control, and overcurrent fault detection.
The device consists of a precision,low-offset linear Hal1circuit with a copper conduction path located near the die.Applied current flowing through this copper conduction pathgenerates a magnetic field which the Hall IC converts into aproportional voltage.Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise,proportional output voltage is provided by thelow-offset,chopper-stabilized BiCMOS Hall IC,which is programmed for accuracy at the factory.
High level immunity to current conductor dV/dt and strayelectric fields, offered by liou proprietary integrated shield technology, guarantees low output voltage ripple and low offset drift in high-side, high voltage applications.
Features and Benefits:
-
Open loop hall effect-based current sensor
-
5V Single supply operation
-
Support unidirectional, bidirectional output, analog signal output
-
The measuring range of primary current from ± 50A to ± 200A
-
Operation temperature range : - 40 ℃ to + 125 ° C
(150 A is - 40C to + 105C; 200 A is - 40 ° C to + 85 ° C)
-
Zero point output voltage:
-X R: Bias QVO and power supply VCC proportional output, Gain fixed
VQV0 = VCCL/2 or VCC / 10
-X F: Bias QVO and Gain are fixed
VQV0 = 2.50 or 0.50
-
Excellent accuracy, linearity, temperature drift
-
low internal resistance can effectively control the heating power consumption
Applications:
-
EV/HEV Electric motor controller
-
Inverter
-
DC/DC
Pin out diagram:

Terminal List Table
|
Number |
Name |
Description |
|
1 |
VCC |
Device power supply terminal |
|
2 |
GND |
Signal ground terminal |
|
3 |
VIOUT |
Analog output signal |
|
4 |
IP+ |
Terminal for current being sampled |
|
5 |
IP– |
Terminal for current being sampled |
Typical circuits:




Wuxi Liou Electronics Co Ltd
Hot Tags: ACS770xCB Hall effect based linear sensor IC Substitute, China, manufacturers, customized, quotation, low price, made in China, Hall Effect Sensor, Closed Loop Hall Effect Sensors














