Common Abnormalities of Current Transformers
Mar 01, 2023| When we use current transformers, the three-phase voltage is only unbalanced. When one phase drops, the other two phases are very normal and the line voltage is very abnormal or accompanied by sound and light signals. In this case, it is very likely to be mutual inductance. The high-voltage or low-voltage fuse of the device may be blown.
When we have a very effective grounded system at the neutral point and the 3-phase voltage indication is unbalanced one phase is lowered but the other two phases are raised or the pointer is swinging, so it may be a single phase to ground when there is a fault or a fundamental resonance but If the three-phase voltage rises at the same time and exceeds the line voltage, it may be due to frequency division or high-frequency resonance.
If the high-voltage fuse is blown many times, it is likely that the internal insulation part of the equipment has been seriously damaged, such as a short circuit between winding layers or turns, and there is also a very effective neutral point grounding system. When the busbar switching operation occurs, the phase voltage rises and swings at low frequency, which is generally a phenomenon of series resonance. When the phase voltage suddenly rises or falls abnormally, it is likely to be the internal insulation of the transformer. Damage, for example, is the insulation support winding and the fault of short circuit between winding layers or turns.
If the voltage transformer in the grounding system of the neutral point ranger is very unstable when the voltage transformer is put into operation, it may be that the high-voltage winding terminal is in poor contact when it is grounded. It is very easy to be threatened personally.


