Function and structure characteristics of miniature current transformer
Jul 22, 2022| Based on the analysis of the function and structure of micro current transformer, the primary winding and the circuit are connected in series with less turns (one or more turns). Therefore, the current of the primary winding completely depends on the current of the measured line, and has nothing to do with the current of the secondary winding. Under normal circumstances, the coil impedance of the AC ammeter or current relay connected to the CT secondary winding is very small, so the CT secondary circuit is in a state of near short circuit.
Based on the structural characteristics of micro current transformer, it is worth noting that the secondary side of current transformer in normal working state is not allowed to be opened, because once the secondary side is opened, the secondary circuit impedance is large, and the secondary current is equal to, then the current is the excitation current, high-voltage secondary winding, which directly endangers the people and equipment on the secondary side. Therefore, it is not allowed to install a fuse on the secondary side of the current transformer to prevent the secondary side from breaking.
When using a small current transformer, first ensure that the measuring range meets the requirements. Once the measured current exceeds the range of the ammeter, it is necessary to replace the AC ammeter with a higher range and the matching current transformer.
In addition, in practical application, the iron core and secondary side of the micro current transformer need to be grounded to prevent accidental electrification of the iron core. Once the primary side edge fails, the secondary side will enter a high-voltage state, which will directly threaten the personnel on the secondary side and cause equipment damage.


