How to avoid Power Current Transformer burning out
Nov 24, 2023| First, install a circuit breaker to prevent branch faults from affecting the entire line, especially to ensure that the branch circuit breaker can trip reliably. Then connect the Power Current Transformer behind the circuit breaker to ensure that the circuit breaker and arrester operate correctly to eliminate the fault when the transformer fails. It is also necessary to strengthen the high-voltage insulation test of the user's Power Current Transformer and arrester to detect the aging of the insulation of the transformer and arrester as early as possible and replace it in time to avoid power outages caused by burnout of the transformer. The last step is to clean the user's equipment regularly to reduce pollution and avoid insulation degradation.
When using the Power Current Transformer, carefully check whether the secondary circuit is open, whether the contact resistance is too high, and most importantly, it cannot be overloaded. In addition, the Power Current Transformer must be maintained and maintained. If the insulation is found to be aging, it must be replaced in time and cleaned regularly to reduce pollution. Only in this way can the Power Current Transformer be safer to use and have a longer service life.


