How to overhaul when the Electrical Current Transformer is stopped

Feb 26, 2022|

The sensitivity of the use of Electrical Current Transformer, high and low efficiency of use, will reflect the equipment usage, quality and other related problems. Sometimes it needs to be repaired. Generally, it is easier to repair when it is turned on. Repair work can be done.

1. When the maintenance starts, you should calm down first, don't blindly do it, and ask more questions. For example: the phenomenon when the fault occurs, ask whether the operation rules are violated, whether the internal parameters have been changed, etc., make an objective and general analysis of the fault according to the situation, and then judge the fault location according to the fault prompt displayed by the Electrical Current Transformer. When overhauling, you should read the instruction manual of the equipment carefully first to understand the maintenance precautions.

2. Don't turn on the electricity rashly, and do necessary safety checks first by looking at it, touching it with your hands, smelling your nose, etc.

(1) Check whether there is tin contact, touch wire or thin metal falling between the two wires between the component leads on the circuit board of the power-saving equipment;

(2) Check whether there is dust on the circuit board.

(3) Check whether the Electrical Current Transformer fast-melting FU is blown;

(4) Check whether there are water droplets on the circuit board;

(5) Check whether the capacitors, rectifier bridges, inverter bridges, integrated circuits and other components have obvious signs of burnout;

In shutdown state, if you need to overhaul the Electrical Current Transformer, you can overhaul it according to the above methods. You must be careful when overhauling, especially some easily damaged areas must be checked and repaired in time.


Send Inquiry