Operating rules for miniature current transformers

May 04, 2022|

When it comes to our miniature current transformers, it does a good job of keeping us safe during construction. Also, as far as our miniature current transformer is concerned, it is actually an electrical device. In this way, when we are using it, we follow some of its operating rules.


In the case of our miniature current transformer, it should not exceed 110 of its rating in terms of its load current. Also, we have to pay attention. If it is overloaded for a long time, it will increase our measurement error. Also, this is due to overheating or damage to its windings.


For the operation of the micro-current transformer, it should be noted that when it is in a relatively normal operating state, the open-circuit operation of the secondary circuit is actually stopped. Otherwise, it would actually generate thousands of volts, which would endanger our people and equipment. Also, as far as the secondary circuit is concerned, it has a small amount of (maintenance) ground.


In addition, for the operation of micro-current transformers, the connection to the secondary circuit of the voltage transformer is not allowed. Otherwise, our transformers will directly produce a series of failures and damages.


When it comes to the operation of micro-current transformers, it is actually necessary to pay attention to oil-immersed micro-current transformers, which should be directly equipped with an oil level gauge and its respirator. In conclusion, for the conditions of 110kV and above, it is actually necessary to directly choose a fully sealed or slightly positive pressure metal expander, otherwise problems and their risks will not be avoided.


Send Inquiry