Operation and maintenance of current transformer and voltage transformer

Sep 22, 2023|

The transformer has part of the function of a transformer, and has the function of converting the high voltage and high current of the primary circuit into the low voltage and small current of the secondary circuit in proportion, so as to ensure that the secondary equipment is not harmed by high voltage and protect personal safety. There are two types of transformers, current and voltage.
1. Operation of current transformer and voltage transformer
The operation of the current transformer changes the current amplitude by changing the number of turns of the primary and secondary coils. This is using the principle of electromagnetic induction, and how Lenz's law works. The work of the current transformer must ensure the rated current. For example, the secondary side is 5A. Overworking for a long time will cause a large error, the instrument cannot display accurate data, and may cause insulation aging and burn out the internal winding. The operation of the voltage transformer is allowed to work excessively, but it cannot exceed 10% of the rated value. Its function is to use the principle of electromagnetic induction to change the voltage amplitude. Since the secondary side is not allowed to be short-circuited, the voltage transformer is also called the instrument. Use a transformer.
2. Maintenance of current transformers and voltage transformers
What you need to pay attention to when maintaining current transformers is: whether discharge occurs during the operation of the current transformer. If so, a certain part may be damaged and needs to be repaired in time; check the temperature of the joint to prevent the temperature from being too high; whether there is any abnormal noise Or smell; whether the three-phase indication value of the meter exceeds the rated value. What you need to pay attention to when maintaining voltage transformers is: check whether the outside of the transformer is damaged; whether there is any abnormal noise; whether the cleanliness meets the standards. Once the above problems occur, personnel must be organized for maintenance. If left alone, the damage to the lines will become more serious, and an explosion accident may even occur, threatening the lives of personnel and causing huge losses to the enterprise.

Send Inquiry