-

2020-1-03Difference between zero sequence current transformer and residual current tra...
Zero-sequence current transformer is a single-turn through-core current transformer -

2020-1-01Hall Effect Sensor principle
Hall effect sensors basically consist of a thin rectangular p-type semiconductor material -

2019-12-27Why can't the current transformer in operation be open? What is the principle?
When the current transformer works normally, the load connected to the secondary is an ammeter or a current meter current coil and a transmitter. -

2019-12-25What should I pay attention to during the use of current transformers?
Nowadays, the current transformers installed and used mainly achieve the protection effect by measuring the current, -

2019-12-23What are the ways to determine the saturation point of the current transformer?
During the operation of the current transformer, a problem of saturation point is involved. -

2019-12-20Feasibility measures to reduce the frequency of current transformer burnout
The burning of current transformers is one of the most common problems. -

2019-12-18Comment on the relationship between the number of turns and the ratio of the ...
It is known from the corresponding experiments that the ratio of the primary current to the secondary current is equal to the inverse ratio of the primary turns to the secondary turns ratio. -

2019-12-16What is a current transformer?
The principle of the current transformer is based on the principle of electromagnetic induction. -

2019-12-13Current transformer usage precautions
Wiring of current transformers We should all follow the principle of series connection. -

2019-12-11Current transformer open circuit preventive measures
In the electrical safety work regulations, it is stipulated that the secondary side of the current transformer must be grounded. -

2019-12-09Current transformer maintenance troubleshooting
The maintenance of current transformers is generally divided into three types -

2019-12-06Current transformer secondary rated current selection
In the case of the same rated current and the same rated output capacity


