Precautions during the use of Electrical Current Transformer

Usually when using Electrical Current Transformer, pay attention to whether the current is below the rated current standard. This is one of the most important issues when using a transformer. If the current does not reach the rated standard range of the transformer, it is easy Cause the transformer to be obstructed and burn out the transformer. In addition, when choosing a transformer, pay attention to that the primary current can not be too large, which will have an adverse effect on the accuracy of the transformer.

Some users usually find that the accuracy of the transformer begins to decrease when using the Electrical Current Transformer. This time is mainly caused by ignoring the rated current. In addition, when the actual secondary output current of the transformer is lower than the standard, the transformer will also be affected. The accuracy has a great impact, these problems must be paid attention to. In addition, users should pay attention when purchasing transformers. They must choose appropriate transformer products for use according to actual application requirements. They must also understand the application methods and precautions of transformers before installation.

When using the Electrical Current Transformer, you should pay attention to the safe application method of the transformer and avoid the mixed use of the transformers. These are not in compliance with the safety regulations. When the voltage of the transformer is short-circuited, you should also pay attention to timely adjustments to prevent the transformer Burned out.