Precautions for installation of current transformer
Jul 24, 2020| ① Change the high voltage and large electric circuit of the secondary circuit to the low electric power 000 small electric circuit (SA or 12) of the secondary circuit standard, standardize and miniaturize the measuring instruments and protection technology, and make the structure light and compact, and the price is convenient Straight and easy to install inside the screen.
②The secondary equipment is separated from the high voltage part, and the secondary side of the transformer is grounded, so as to ensure the safety of the equipment and the person.
Pay attention to the following when installing the current transformer:
① It can be put into operation after passing the pressure test.
② The secondary coil circuit of the high-voltage current transformer and the low-voltage running current transformer must not be open, and one end must be reliably grounded. Otherwise, the magnetic flux in the core of the current transformer will increase sharply, generating a high induced electromotive force on the secondary coil.
Voltage transformers are widely used in power systems and are divided into electromagnetic and capacitive types. The primary side of the voltage transformer is connected to the measured high voltage, and the voltage on the secondary side is generally 100V, which is used for instrument indication or as the starting power supply for the protective action device. When the voltage transformer is used, the measuring instrument circuit can be isolated from the high-voltage circuit, which can ensure the safety of personal and electrical equipment.
Voltage transformer is a small high-voltage transformer with single-phase and three-phase voltage transformers. Used on high-voltage power lines. Pay attention to the following two issues when using voltage transformers.
(1) The secondary side of the voltage transformer must not be short-circuited, and can only be put into operation after passing the withstand voltage test.
(2) Always check for unsafe factors such as oil shortage, oil leakage, cracks and damage of the oil porcelain bushing of the voltage transformer.https://www.ctsensorducer.com/


