Precautions for the use of zero-sequence current transformers

Oct 03, 2022|

1. During the operation of the zero-sequence current transformer, if it is found that the temperature of the zero-sequence current transformer is too high, there are abnormal phenomena such as discharge noise, serious oil leakage, etc., the operation should be stopped immediately, and the fault should be checked in time to determine the cause of the fault, and then The zero-sequence current transformer can be put into normal use only after the fault is eliminated.

2. Keep the installation environment of the zero-sequence current transformer clean, and avoid a large amount of dust from accumulating on the surface of the zero-sequence current transformer, which will affect its performance. At the same time, pay attention to the ambient temperature. The zero-sequence current transformer has certain requirements for the ambient temperature, - the minimum is 10 °C, and the maximum is 40 °C. Once it is used in an environment that exceeds the low temperature and high temperature standards, the use of zero-sequence current transformers The performance will be greatly reduced, affecting the use effect of the zero-sequence current transformer. Therefore, the temperature of the operating environment of the zero-sequence current transformer is controlled to ensure the normal use of the zero-sequence current transformer.

3. The maintenance work of the zero-sequence current transformer should be carried out regularly, which can effectively prolong the service life of the zero-sequence current transformer. Therefore, it is necessary to do a good job in the maintenance and cleaning of the zero-sequence current transformer. During the maintenance process of the zero-sequence current transformer In the process, focus on checking whether the fastening part of the zero-sequence current transformer is loose, whether the casing is cracked, and has serious heat generation. If it is really impossible to repair, it should be replaced with a new zero-sequence current transformer of the same specification.


Send Inquiry