Detailed introduction of each component of current transformer

Oct 05, 2022|

Iron cores are generally made of iron-based nanocrystalline materials and then undergo a special annealing process. The iron cores made of iron-based nanocrystalline materials have high magnetic permeability and high inductance, which can ensure the accuracy of current transformers. The small size can make the structure of the current transformer more reasonable. The iron core made of iron-based nanocrystalline material also has the characteristics of good temperature characteristics and low consumption. Of course, the iron core made of this material also has disadvantages. Its only disadvantage is the poor high frequency characteristics.


The secondary winding of the current transformer is basically made of round copper wire as the raw material. Of course, we have a wide variety of current transformers. Different current transformers have to consider the requirements of ensuring the error performance, the temperature rise of the windings for long-term operation, and the wire To choose round copper wires with different cross-sectional areas, the secondary winding must be in a closed state when the current transformer is operating.


The primary winding is the same as the secondary winding, and the conductor material is selected according to different current transformer types. Generally, our common conductor materials include soft copper tape, round copper wire, flat copper wire, enameled wire, the same bus bar, copper rod and copper tube. . Of course, different conductor materials are used as the primary winding, so its performance and function will definitely be different. The number of turns of the primary winding of the current transformer will be adjusted according to the rated primary current to ensure the accuracy of the current transformer.


Insulating materials are non-conductive materials under the allowable voltage, but they are not absolutely non-conductive materials. Under the action of a certain applied electric field strength, processes such as conduction, polarization, loss, and breakdown will also occur, and long-term use will also occur. . In order to conduct conduction, polarization, breakdown and other processes of surface insulating materials, current transformers generally use epoxy resin materials with strong insulating properties, moisture-proof and anti-aging as insulating materials other than the shell. The only disadvantage of epoxy resin materials as insulation materials for current transformers is poor heat dissipation.


The shell of the current transformer is generally made of flame retardant ABS engineering plastic. The advantages of this material are high production efficiency, beautiful appearance, simple structure and low production cost. The disadvantage is that the service life of this material is longer than that of resin casting. much shorter.


The measurement error of the current transformer cannot exceed 10%, and the phase angle error cannot exceed 7%. Therefore, our manufacturers attach great importance to each nose tip of the current transformer. This is because of the cross-sectional area of the iron core and the material of the iron core. , the number of turns of the winding will affect the measurement error of the current transformer. Therefore, our manufacturers have very strict requirements for each component of the current transformer, in order to reduce the measurement error of the current transformer.


Send Inquiry