Principles and methods of current transformer selection
Mar 17, 2023| When selecting a voltage transformer, it is necessary to make a choice based on the primary wiring method (including Y-type connection and V-type connection), the power consumption level of the primary voltage, the capacity requirements of the secondary line, and the requirements for transformation accuracy.
Current transformers are mainly assembled in different switchgears. The models of current transformers are different, and the structures of current transformers often have large differences (including copper bar lapping form, iron core, shape, etc., and dynamic and thermal stability. ability). For example, the current transformers equipped with the central handcart cabinet are mostly LZZBJ9 or AS12 models, but there are many models equipped with fixed cabinets.
There are many differences between voltage transformers of the same model and specification. Generally, there will be various combinations mainly due to the difference in transformation ratio, the capacity of the secondary coil, the protection coil and the precision of the metering coil. When selecting the transformation ratio of the current transformer, the actual load rated current should be obtained first, and this current is preferably at 65%-85% of the measurement range of the current transformer. For example, if the rated current is 70A, you should choose a voltage transformer with a transformation ratio of 100/5.
The current transformer transformation ratio is 100/5 (100/5 means that when the primary current is 100A, the secondary output current generated is 5A. This value describes the transformation ratio value, rated measurement value and rated output value. Current transformer and The transformation ratio of the ammeter must be selected.) It means that within the current range of 100*120%, the measurement accuracy can meet the measurement accuracy marked on the nameplate of the current transformer, for example: 0.2 level (measurement accuracy error is 0.2%), Level 0.5 (measurement accuracy error is 0.5%). If the measurement result exceeds this current, there may be a large error with the actual current. If too high a current enters the saturation region of the core, the measured data will be meaningless.


