Standard for Current Transformer Configuration

Aug 12, 2022|

1) The configuration of the current transformer should minimize the dead zone of the main protection. To protect the part connected to the secondary winding of the transformer, it should prevent the existence of a dead zone in the protection when a fault occurs inside the transformer when the entire set of protection stops using and the protected main equipment operates again.

2) The configuration of current transformers should also be safe and reliable to protect various faults of the system. Under normal circumstances, in the power network with reasonable neutral grounding devices, three-phase current transformers should be equipped; in the case of unreasonable grounding devices In the power grid, according to the characteristics of the protector, in order to ensure that two-phase faults occur in two different places, only one faulty component can be removed with 2/3 chance to improve the safety and reliability of the power supply system. It can be equipped with two-phase or three-phase Phase current transformers;

3) In order to protect each position of the main equipment, under normal circumstances, each main equipment should be equipped with a set of current transformers. Under the premise that reliable maintenance can be established, the total number of transformers should be avoided as much as possible. When necessary, the total number of secondary windings of transformers should be increased.

4) The total number and technical characteristics of the secondary windings of the transformer should consider the provisions of relay protection devices, protection devices and testing instruments, and electromagnetic energy measurement and verification equipment.


Send Inquiry