The difference between zero sequence current transformer and ordinary current transformer

Sep 18, 2023|

The common characteristics of zero-sequence current transformers and ordinary current transformers: both zero-sequence current transformers and ordinary current transformers work according to the principle of electromagnetic induction, but their working states are different.
The primary coil of an ordinary current transformer only passes through one phase conductor of the measured line, the current in the primary coil is the load current of the phase, and the secondary current is the corresponding ratio of the primary current.
The primary coil of the zero-sequence current transformer passes through the three-phase conductor of the measured line. Under normal conditions, since the vector sum of the three-phase currents is zero, there will be no magnetic flux in the iron core, so there will be no induced current in the secondary coil.
When a single-phase ground fault occurs in the protected circuit, the vector sum of the three-phase currents is no longer zero. At this time, an induced magnetic flux will be generated in the iron core of the transformer, and there will be an induced current in the secondary coil, thereby starting the relay to operate The protective device operates.

Send Inquiry