The role of Power Current Transformer

Nov 27, 2021|

In order to ensure the safe and economic operation of the power system, the operation of the power equipment must be monitored and measured. However, the general measurement and protection devices cannot be directly connected to the primary high-voltage equipment, and the large current of the primary system needs to be converted into a small current proportionally. It is used for measuring instruments and protection devices. In this way, the role of Power Current Transformer came into being. The function of the Power Current Transformer for measurement is to measure (billing) and measure the current of the operating equipment; the Power Current Transformer for protection is mainly used with relay devices, and provides signal cut-off to the relay device when the line is short-circuited and overloaded. Fault circuit to protect the safety of the power supply system.

When measuring the large current of alternating current, in order to facilitate the measurement of the secondary instrument, it needs to be converted to a relatively uniform current (my country stipulates that the secondary rating of the Power Current Transformer is 5A or 1A), and the voltage on the line is relatively high, such as direct measurement It is very dangerous. The Power Current Transformer plays the role of current conversion and electrical isolation. It is a sensor used by secondary devices such as measuring instruments and relay protection in the power system to obtain electrical primary circuit current information. The Power Current Transformer converts high current into low current proportionally. The primary side of the Power Current Transformer is connected to the primary system and the secondary side Connect to measuring instruments, relay protection, etc. Therefore, the Power Current Transformer will be divided into two types: Power Current Transformer for measurement and Power Current Transformer for protection.


Send Inquiry