What are the configuration requirements for power current transformer?
Jun 07, 2019| The configuration of the power current transformer should be able to reliably protect various types of faults of the system. In general, three-phase power current transformershould be configured in the grid where the neutral point is effectively grounded; in the grid that is not effectively grounded, according to the protection device Performance, in order to ensure two-phase ground fault at two different points, there can be 2 / 3 opportunities to cut only one faulty component, improve power supply reliability, can be configured with two-phase or three-phase power current transformer
In order to reliably protect various parts of the main equipment, in general, each main equipment is configured with at least one set of power current transformer. Under the premise of achieving reliable protection, the number of transformers should be minimized. If necessary, the number of secondary windings of the transformer should be increased.
The number of secondary windings of the power current transformer and its technical characteristics should meet the requirements of relay protection, automatic devices and measuring instruments, and energy metering devices. Power current transformer are often divided into: wall-through type, pillars (or cascade type and casing type, etc. according to the installation method; and can be divided into dry type, oil-filled type, capacitive type and SF6 type according to the insulation method.
www.ctsensorducer.com


