What are the symptoms of excessive secondary load on a current transformer?
Sep 10, 2025| I. Abnormal Electrical Parameters
1. Current Waveform Distortion
The secondary current exhibits a noticeable clipped or flattened waveform, with increased high-order harmonic content (the third harmonic can account for over 15%);
Increased current phase difference during a fault (an error exceeding 5% will trigger an alarm);
2. Impedance Measurement Exceeds the Rated Value;
The measured secondary circuit impedance exceeds the rated value (e.g., >0.8Ω for a 5A system);
Abnormal Power Factor (COSφ < 0.8 indicates excessive inductive load);
II. Abnormal Equipment Operation
1. Abnormal Temperature Rise
Terminal block temperature exceeds 70°C (infrared temperature measurement indicates hot spots);
Overheating of the core causes abnormalities in the insulating oil chromatographic analysis. Normal (acetylene content > 5μL/L)
2. Mechanical Vibration and Noise
Low-frequency vibration and noise of 50-100Hz caused by magnetic saturation of the iron core
Discharge noise in the terminal box (arcing caused by poor contact)
III. Abnormal Protection Functions
1. Malfunction/Rejection of Protection Devices
Differential protection malfunctions due to current imbalance (differential current exceeds 0.5in)
Overcurrent protection malfunctions due to current decay (operation time extended by more than 30%)
2. Excessive Metering Error
Energy meter error exceeds the 0.5-level allowable range (error reaches 2% at low load)
Abnormal power factor meter display (COSφ fluctuation > 0.1)



