What are the types of current transformers

Jan 13, 2023|

Current transformer for measurement (or measurement winding of current transformer): within the normal operating current range, it provides current information of the power grid to measurement, metering and other devices. Measure the current that CT flows through the equipment when the primary equipment is working normally. The measured current is used for the metering circuit of the relay protection device, the comprehensive automatic device and the metering device. It requires relatively high metering accuracy under normal load current conditions.


Protection current transformer (or protection winding of current transformer): In the state of grid fault, it provides grid fault current information to relay protection and other devices. The protection CT is that when a fault such as a short circuit occurs in the primary equipment or the line, and the primary equipment flows through a large fault current, the current output by the secondary side of the CT can still basically reflect the size of the primary side current. What it requires is that the CT is still not saturated under the condition of a large fault current, that is, when the primary side flows N times the rated current, the current error output by the secondary side is still small.


Usually, the current used by the protection circuit and the measurement circuit is provided by the protection CT and the measurement CT respectively. The two cannot be used interchangeably, and most of the measurement circuits have components. In order to protect these components when the line fails, it is usually required to measure the saturation of the CT when a large short-circuit current flows through the primary side.


Send Inquiry