What is the role of Electrical Current Transformer

Jul 16, 2021|

Electrical Current Transformer is a current conversion device. It turns high-voltage and low-voltage large currents into low-voltage small currents to supply appearance and relay maintenance equipment and isolate appearance and maintenance equipment from high-voltage circuits. The secondary side current of the Electrical Current Transformer is 5A, which makes the measuring appearance and relay maintenance equipment safe and convenient to use, and it can also be standardized in production.

The structure of the Electrical Current Transformer is composed of an iron core, a primary winding, a secondary winding, a terminal and an insulating support. The primary winding of the Electrical Current Transformer has a small number of turns. It is connected in series in the circuit that needs to measure the current, and a larger current flows through it. The secondary winding has a large number of turns, which is connected in series to the measurement surface or the relay maintenance circuit. in.

The secondary circuit of Electrical Current Transformer does not allow open circuit. When the Electrical Current Transformer is in operation, its secondary circuit is always closed, but because the impedance of the series winding of the measuring appearance and maintenance equipment is very small, the operation of the Electrical Current Transformer is close to the short-circuit condition, and the magnetizing force generated by the primary current is large. All are compensated by the secondary current, the total magnetic flux density is not large, and the potential of the secondary winding is not large. When the Electrical Current Transformer is open, the impedance of the secondary circuit is infinite, and the current is equal to zero. The primary current completely becomes the excitation current, and a high electric potential is generated in the secondary winding, which imposes personal safety and constitutes the appearance, maintenance equipment, and secondary insulation of the transformer. damage.

The secondary circuit of the Electrical Current Transformer must be grounded to avoid primary insulation breakdown and high voltage in the secondary series, which will threaten personal safety and damage the equipment.


Send Inquiry