What should be paid attention to when measuring the error of current transformer?
Aug 12, 2024| 1. Environmental conditions
The measurement should be carried out under stable ambient temperature and humidity conditions to avoid the influence of drastic changes in temperature and humidity on the measurement results.
There should be no strong electromagnetic field interference at the measurement site to ensure the accuracy of the measurement.
2. Selection of standard equipment
The standard current transformer and measuring instrument used should have sufficiently high accuracy and stability and be within the validity period of the calibration.
3. Wiring correctness
Ensure that the wiring of the primary winding and the secondary winding is correct and the polarity connection is correct.
The wiring of the secondary circuit should be firm and reliable, with good contact to avoid errors caused by contact resistance.
4. Preheating and stabilization time
The measuring equipment and the current transformer under test should be fully preheated before measurement to achieve a stable working state.
5. Measurement range
The measurement should be carried out within the rated current and load range specified by the current transformer to ensure the validity of the measurement results.
6. Load matching
The secondary load should match the rated load of the current transformer and be connected according to the specified load value.
7. Selection of measurement points
Measurements should be made at different current points, including percentage points of rated current, such as 5%, 20%, 100%, 120%, etc., to fully evaluate the error characteristics of the transformer.
8. Data recording and processing
Accurately record the measurement data, and perform data processing and error calculation in accordance with relevant standards and regulations.
9. Safety measures
Pay attention to safety during the measurement process, especially in cases involving high voltage and high current, to prevent electric shock and short circuit accidents.


