Wide application and operation mode of ground fault zero sequence current sensor

Apr 19, 2019|

The fundamental principle of the ground fault zero sequence current sensor is the Kirchhoff current law. The algebraic sum of the complex current flowing into any node in the circuit during operation is equal to zero. In the case of normal line and electrical equipment, The vector sum of the phase currents is equal to zero. Therefore, the secondary winding of the zero-sequence current transformer has no signal output, and the actuator does not operate.

When the ground fault zero sequence current sensor has a ground fault during operation, the vector sum of each phase current is not zero. When the operation is performed, the fault current can cause magnetic flux, zero sequence in the toroidal core of the zero-sequence current transformer. The secondary side induced voltage of the current transformer causes the actuator to act, drives the trip device, switches the power supply network, and achieves the purpose of ground fault protection.

The ground fault zero sequence current sensor is very widely used. It is not only suitable for electromagnetic relay protection to a certain extent, but also can be adapted to electronic and microcomputer protection devices during operation. The user can operate according to the system's operation mode. For effective grounding or neutral point non-effective grounding, select the corresponding zero-sequence current transformer.

The ground fault zero sequence current sensor is a device that uses the zero-sequence current generated during grounding to protect the action. A special zero-sequence current transformer is used on the cable line to achieve grounding protection. The biggest feature of zero-sequence current protection is that it only reflects single-phase ground faults, because other non-ground short-circuit faults in the system will not produce zero-sequence current, so zero-sequence current protection is not disturbed by any faults.www.ctsensorducer.com


Send Inquiry