Wiring Guidelines for Current Transformers
Oct 17, 2022| a. The current transformer cannot allow secondary open circuit
The current transformer manufacturer solemnly warns everyone not to open the circuit twice when installing the current transformer, otherwise it will lead to very serious consequences. Which will cause the iron core of the current transformer to accumulate a lot of heat, and even cause the current transformer to burn out. The second is that the secondary open circuit will cause the number of windings of the current transformer coil to increase, and its induced voltage will be much higher, which may lead to breakdown of the equipment and endanger the life safety of the staff.
b. The secondary side of the high-voltage current transformer must have one end that needs to be grounded
Because the primary side of the high-voltage current transformer is in a high-voltage state, at this time, if the insulation performance of the primary and secondary coils decreases, the equipment will be broken down by high-voltage. It can ensure the safety of the equipment and the safety of the staff.
c. The measurement and protection port of the current transformer cannot be connected incorrectly
Because the measurement and protection ports are different according to the design thickness of the iron core, if the connection is wrong, the data measured by the current transformer during normal operation will be unreliable.


