Over Current Overcurrent Protection Automatic Circuit Recloser ACR

We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for ZCT Zero phase current transformer, 3 Ply Face Mask With Earloop, Zero-Flux DC Current Transformer. Our company warmly welcomes friends at home and abroad to visit, to discuss cooperation and seek common development! Our business mode is mainly production-oriented and trade-oriented combined sales, but also with customers to do a good job in product development and technical work.

Introduction

In the electrical systems always exists the possibility of having shutdowns due to over currents or short circuits produced by operation mistakes, ambient conditions, lack of maintenance or atmospheric discharges. Ground fault it occurs when one of the system phases get on direct contact to ground or to any metallic part that is grounded. The ground fault has its origin on different ways but the more common are reduced insulation, physical damages to insulation system or excessive transient or steady-state voltage stresses on insulation. These problems can be produced due to moisture , atmospheric contamination, insulation deterioration, mechanical stresses, etc. Although the situations mentioned before can be avoided following a good maintenance Schedule, always exists the latent risk of a fault, commonly during the installation or major maintenance to equipment.

Features

• Frequency Range: 50-400Hz

• Over Load withstand: 1.2 x rated current continuously

• AC isolation resistance: 5.0KV for 60s

• Rigid housing case with UL® 94V-0 polycarbonate

• Safety standard: IEC/EN60044-1

• Nominal phase angle error and

Nominal linearity error: Conform IEC61869-2

                    ConformIEC60044-1

• Max. Operation voltage: AC660V

• Thermal Insulation Class: Class B

• Humidity: Up to 95%RH (Non-condensing)

Description

Close to zero load shift

Excellent balance properties

Precision output voltage

Minimal thermal variance

RoHS compliant

Smaller volume, lighter weight

Perfect protection, delicate structure for convenient installing

Excellent design and industrial appearance

High accuracy satisfied diverse application

Flexible design

Versatile modular box for diverse application

Mechanical Specifications

P/N	Main circuit Current  (A)	Diameter(Φ) (mm)	Dimensions(mm)			Layout dimensions(mm)
			L	W	H	D1-D2	M
LO-ZCT513102	0-100A	46	85	32	92.5	88-100	6
LO-ZCT513202	0-250A	65	108	32	118.5	109-122.5	6
LO-ZCT513302	0-315A	80	128	36	138.5	134-144	6
LO-ZCT513402	0-630A	100	150	36	160.5	152-171.5	6
LO-ZCT513502	0-800A	120	172	36	182.5	177-196.5	6

ABSOLUTE MAXIMUM RATINGS
Operating free air temperature range	-20ºC to 65ºC
Storage temperature range	-40ºC to 85ºC

High accuracy qualified
This series of products are on the basis of the existing mature technology, choose more high quality raw materials and combined with the optimization of the shape design, test accuracy gets strong guarantee and better than the national standard requirements: 0.5%, for special requirements,  accuracy can reach to 0.2%.

 This project combines the optimal magnetic circuit design, and take full account of the necessary space requirements, so as to ensure the balance test. If necessary, the balance property can be in the specified detection conditions to achieve 5mA-50mA. Fully meet the detection circuit requirements.

At the same time, this series of products can be used for main circuit current testing, and fire power monitoring current, detection current scope from 50A-2000A, Accuracy is better than class 0.5 when secondary output at 5A .Accuracy is better than class 0.2S level when secondary output at 1A,

When measure high current , mA level weak signal can be outputed,the accuracy is better than class 0.1 

 

Custom-made

The module box can be customized according to the customer's requirement. Or optimize the box in the original basis. We will do our best to support these optimizations.

All module boxes can be re-designed and developed according to customer needs. Even the residual current transformer can also be re-designed according to special needs of customers.

How to Order?

1. Please let us know our P/N for off-the-shelf parts. Please send us electric specifications if you need custom-made parts.

2. Proforma invoice (PI) will be sent to you.

3. Please check and confirm the PI.

4. Once we confirmed the order, please pay it soon.

5. After full payment, all goods will be sent to you in 10-15 days as usual.

6. OEM/ODM is welcomed. Free OEM for more than 5000 sets orders.

Since our establishment, we have always adhered to the policy of 'high technology, high quality and high service', and with professional and unique innovative ideas, we have grown rapidly in the industry of Over Current Overcurrent Protection Automatic Circuit Recloser ACR in China. With the development of the market, we will work harder to provide reliable and stable products and a full range of professional services to global customers. We have established a perfect marketing system that integrates sales, customer service, market research, analysis and decision making.

Hot Tags: ground fault protection current transformer, China, manufacturers, customized, quotation, low price, made in China, Split core AC Current Transformer, High-range Current Transformers, High Current Center Through Current Transformer, Current transformer with DC immunity, Split type AC Current Transformer, DC Immune High Accuracy Current Transformer