Hall Effect Current Sensor For Renewable Energy And Power Distribution LOCS-LSEK
reliable Hall effect current sensors for solar and wind energy systems. Used for monitoring and measuring current in renewable energy applications, ensuring optimal performance and energy efficiency
- Product Introduction
Wuxi Liou Electronics Co.,Ltd is one of the leading manufacturers and suppliers of hall effect current sensor for renewable energy and power distribution locs-lsek in China. Our factory offer high quality customized products made in China with low price. Welcome to contact us for quotation.

Hall Effect Current Sensor for Renewable Energy and power distribution LOCS-LSEK
P/N: LOCS-LSEK
Split core type Hall AC/DC Current Sensor
The LOCS-LSEK series current sensor is a measurement module that utilizes the Hall effect and open-loop measurement principle to convert the measured current (AC, DC, or irregular waveform current) into a corresponding output voltage. It features high insulation between the primary and secondary sides. The secondary side accurately reproduces the waveform of the primary side, offering high accuracy, high linearity, high integration, a simple structure, long-term operational stability, and adaptability to various working environments. It is widely used in system control and monitoring of electrical equipment in industries such as power, petroleum, coal mining, chemical, railway, telecommunications, and building automation.
Product Features:
- Capable of measuring various waveform currents
- High linearity
- Split-core type structure easy for installment
- Through-hole open design for easy maintenance
- Strong overload capacity
- Fast response time
- High insulation between primary and secondary sides
Part Number information:

|
Electric Specifications @25℃ |
||
|
Rated measuring current (Ipn) |
50-600A |
A |
|
Measuring range (Ip) DC |
2*Ipn 700AMax |
A |
|
Over load capacity (Ioc) |
2000 |
A |
|
Rated output voltage (Vdc) |
0~±4V , 2.5±1V, 2.5±2V etc |
V |
|
Load resistor |
>=10K |
Ω |
|
Accuracy |
1.0% |
% |
|
Supply voltage |
Pn ±5% |
V |
|
Power consumption current |
≤25 |
mA |
|
Zero offset voltage |
@P1 ≦25mV @P3&P4 2.5V±25mV |
mV |
|
Magnetic offset voltage |
<±20mV @Ip→0 |
mV |
|
Offset Voltage Temperature Drift |
<±0.5 @-25℃~+85℃ @Ip=0 |
mV/℃ |
|
Linearity |
1.0% |
% |
|
Response time |
<7.0 |
us |
|
Band width |
DC-20 |
KHz |
|
Dielectric strength |
AC4KV 50Hz 60s |
KV |
Instructions
1.Incorrect wiring may cause the damage of sensor.
2.When the measured current through the center hole of the sensor, the current will be measured at the output end.
3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
4.User can adjust the output extent of sensor if necessary.
5.Rated input current and output voltage of sensor can be customized.
Standards
- IEC61010-1
- EN50178
- IEC61800-5-1
- UL94V-0
- RoHS ,Reach
|
Operating Conditions |
|||
|
Value |
Unit |
Symbol |
|
|
Operating temperature |
-40℃~+70℃ |
℃ |
TA |
|
Storage temperature |
-25℃~+85℃ |
℃ |
TA |
|
Weight(Appro) |
45 |
g |
M |
Dimensions:




WuXi Liou Electronics Co Ltd
Hot Tags: hall effect current sensor for renewable energy and power distribution locs-lsek, China, manufacturers, customized, quotation, low price, made in China, Hall Effect Sensor, Closed Loop Hall Effect High Current Sensor, Closed Loop Hall Effect Sensors
You Might Also Like













