Current transformer wiring inspection method

Feb 08, 2023|

1. In order to check whether the secondary side of the current transformer is disconnected or short-circuited, the wires connected to the A-phase voltage terminal and the C-phase voltage terminal of the electric energy meter are disconnected successively. Under normal circumstances, the circle of the electric energy meter The disk should appear to spin. If the disc of the electric energy meter does not rotate after the voltage of phase A is cut off, it means that the phase C of the current transformer is disconnected or short-circuited. On the contrary, if the disc of the electric energy meter does not rotate after the voltage of phase C is cut off, it means that the current transformer Phase A has been disconnected or short-circuited.

2. How to determine whether the voltage transformer is reversed? We can distinguish it by connecting the ammeter to the secondary side of the current transformer successively, and checking the current situation after detection. If it is a star connection, the middle phase current is twice the other phase current.

3. To distinguish whether the current transformer has a good grounding device, you can use an ammeter for accurate detection. During the detection process, one side of the ammeter needs to be connected to the terminal of the voltage transformer that is not connected to the grounding device, and the other end is connected to the secondary line of the current transformer. If there is a grounding device, the current of the ammeter is expressed as 100V. If not, current is 0.

4. If the current transformer wants to verify whether the grounding device is suitable, it can also be verified by current. The method is to connect one terminal of the ammeter to the grounding device, and the wire of the other terminal to connect the electric energy meter. If the terminal is connected properly, the ammeter will have no indication.

Send Inquiry