How to judge whether there is an error in the current transformer?

Oct 24, 2024|

1. Appearance inspection: Check whether the appearance of the current transformer is damaged, deformed, burnt or other abnormal conditions. If these problems exist, it may affect its performance and cause the error to increase.
Insulation test: Use an insulation resistance meter to measure the insulation resistance between the primary winding and the secondary winding, between the primary winding and the iron core, and between the secondary winding and the iron core of the current transformer. The insulation resistance should meet the requirements of relevant standards. If the insulation resistance is too low, it may cause leakage, affect the measurement accuracy, and cause errors.
2. Polarity check: Whether the polarity of the current transformer is correct or not is related to the accuracy of the measurement results. The polarity of the current transformer can be checked by DC method, AC method or comparison method. If the polarity is reversed, it will cause a large error in the measurement result.
3. Ratio check: Check whether the ratio of the current transformer is correct by measuring the primary current and secondary current of the current transformer and calculating the ratio between them. If the ratio is inaccurate, it will cause errors in the measurement results. You can use professional equipment such as current transformer calibrator to check the ratio.
4. Secondary load check: The secondary load of the current transformer should be within its rated load range. If the secondary load is too large or too small, it will affect the performance of the current transformer and cause errors. The size of the secondary load can be calculated by measuring the resistance, inductance and other parameters of the secondary circuit, and compared with the rated load of the current transformer.
5. Error test: Use professional equipment such as current transformer calibrator to test the error of the current transformer. The error test can measure parameters such as the ratio difference and phase angle difference of the current transformer, and compare them with relevant standards to determine whether there is an error in the current transformer.
6. Operation status check: Observe the working status of the current transformer during operation, such as whether there is abnormal sound, heat, etc. If there is an abnormality, it may affect its performance and cause an increase in error.

Send Inquiry