Operation errors and prevention methods of current transformers
Jan 18, 2023| 1. Misoperation caused by wrong wiring. In electrical equipment with a protective zero connection circuit, when installing a residual current instrument transformer, if the protective zero connection wire is mistakenly passed through the residual current transformer, the residual current of the electrical equipment will not be measured, causing the residual current protection device to fail. refusal to move;
2. Misoperation caused by improper wiring. Since the residual current transformer implements important grounding for the working summary line, a part of the working current flows into the ground through the important grounding electrode, resulting in misoperation of the residual current;
3. Misoperation due to overvoltage;
4. Misoperation caused by the influence of high frequency on ground current;
5. Misoperation caused by asynchronous switch closure;
6. Misoperation caused by inrush current;
7. Misoperation caused by electromagnetic interference;
8. Misoperation due to circulating current;
9. Several causes of misoperation of the residual current transformer caused by the low insulation resistance of the working neutral line and the prevention methods.


