-

2021-3-01Working principle of current Hall sensor
The Hall principle current sensor is based on the two basic principles of Hall magnetic balance principle (closed loop) and Hall direct measurement (open loop). The principle of the open loop current -

2021-2-26Anti-interference of current Hall sensor
The electromagnetic field A1 DC current transmitter closed-loop Hall effect current sensor uses the principle of electromagnetic field of the primary wire. Therefore, the following factors directly af -

2021-2-24Capacity selection of high voltage current transformer
It is determined according to the capacity of the secondary load of the current transformer. Accumulate according to the rated power consumption of each component in the actual application, and leave -

2021-2-22Working principle of voltage transformer
Voltage transformer: A voltage transformer is a voltage conversion device. It converts high voltage to low voltage so that the low voltage value reflects the change of the high voltage value. Therefor -

2021-2-19Application of high voltage current transformer
In order to transmit electrical energy, the power system often uses AC voltage and large current loops to send power to users, which cannot be directly measured with meters. The function of the transf -

2021-2-17Principle of high voltage current transformer
The current transformer is composed of a closed core and windings. The voltage transformer is a transformer with an iron core. The current transformer can be short-circuited for the second time, but n -

2021-2-15Working principle of current sensor
Current sensors can be divided into: transformer, electromagnetic induction principle, can only measure alternating current, generally used to measure power frequency alternating current Hall current -

2021-2-12Precautions for current transformers
Current transformer: Precautions for use When the current transformer is running, the secondary side is not allowed to open. Because once the circuit is opened, the primary side current becomes the ex -

2021-2-10Principles of using current transformers
The wiring of current transformers should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, and the secondary winding should be conne -

2021-2-08Main features of current transformer
Adopt front-end digital technology, optical fiber transmission, good electromagnetic compatibility. The amplitude-frequency characteristics and phase-frequency characteristics are good, and high measu -

2021-2-05Working principle of current transformer
In the lines of power generation, transformation, transmission, distribution, and consumption, the currents vary greatly, ranging from a few amperes to tens of thousands of amperes. In order to facili -

2021-2-03Protection current transformer
1. Overload protection current transformer 2. Differential protection current transformer 3. Grounding protection current transformer. The current transformer for protection is mainly coordinated with


