-

2021-2-01Current transformer for measurement
When measuring the large current of the alternating current, in order to facilitate the measurement of the secondary meter, it needs to be converted into a relatively uniform current (China stipulates -

2021-1-29Four wiring methods of current transformer
The connection method of the current transformer is the wiring form of a single current transformer. It can only reflect the situation of single-phase current. It is suitable for the situation where o -

2021-1-27Insulation structure of current transformer
In high-voltage power systems, the internal insulation of primary power equipment usually adopts a capacitive insulation structure. The so-called capacitive insulation structure refers to the use of i -

2021-1-25The role of current transformer
From the wires that pass large currents, small currents are induced in a certain proportion for measurement, and can also provide power for relay protection and automatic devices. First select the app -

2021-1-22Precautions for the application of current transformers
In applications such as switching power supplies, motor current load detection, lighting and instrumentation, current mutual inductance transformers are generally used as control, circuit protection a -

2021-1-20Main points of current transformer design
The current transformer is composed of a closed core and windings. Its primary winding has a few turns, which is stringed in the line of the current that needs to be measured. Therefore, it often has -

2021-1-18Why should the current transformer be grounded
It is to ensure safety, one is equipment safety, and the other is personal safety. Because there are distributed capacitances between the primary winding and the secondary winding of the current trans -

2021-1-15The principle of current transformer
During the production process, the operating conditions of each primary equipment in the system are monitored to ensure the safe operation of the power system. The current transformer usually converts -

2021-1-13Preventive measures for current transformers
(1) The secondary circuit of current transformer is not allowed to install short-circuit protection equipment such as fuses; (2) The secondary circuit of the current transformer is generally not switc -

2021-1-11Working principle of current transformer in operation
The current transformer turns the large current on the primary side into a standard small current (5A or 1A) on the secondary side. The working principle is similar to that of an ordinary transformer, -

2021-1-08Problems that should be paid attention to in the operation of current transfo...
The secondary side of the current transformer must not be open during operation. Once the secondary side is open, it will burn out due to excessive iron loss and high temperature, or the voltage of th -

2021-1-06Wiring method of Electrical Current Transformer
The selection of the electrical current transformer wiring method for measurement is related to the grounding method of the neutral point of the power grid. When it is an ineffective grounding system,


