-

2021-3-30Manufacturing method of residual current transformer core
There are two manufacturing methods for the core of residual current transformer: winding into a ring and ring-shaped punching. The material of the winding core is generally cold-rolled strip with a t -

2021-3-29Selection of core material for residual current transformer
The excitation current of the primary circuit of the residual current transformer is very small, and it works under the condition of weak magnetic field. For the residual current protection device wit -

2021-3-28Balance characteristics of residual current transformers
The deviation of the conductor in the magnetic core and the angle of the head and tail of the spiral core are the two main factors that affect the balance characteristics of the current transformer. A -

2021-3-27Working principle of residual current transformer
The residual current transformer is the detection element of the leakage protector. Its main function is to detect the residual current (earth fault current such as electric shock, leakage, etc.) of t -

2021-3-26Current transformer accuracy check
The transformer error test generally uses the measured transformer to compare with the standard transformer, and the secondary current difference between the two transformers is the measured transform -

2021-3-25Demagnetization of load core of current transformer
For current transformer demagnetization, the primary winding is open, and the secondary winding is energized with power frequency current. It can be judged by the current transformer as the current va -

2021-3-24Current transformer demagnetization inspection
When the current of the current transformer suddenly drops, the core of the transformer may generate residual magnetism. For example, the current transformer suddenly cuts off the power supply under h -

2021-3-23Current transformer wiring method
When the primary current of the current transformer changes within a certain range, it is generally specified as 10~120%I1N, the secondary current should change proportionally, and the primary and sec -

2021-3-22Normal working performance of current transformer
When the current transformer is working normally, the secondary side is used in series with current coils such as measuring instruments and relays. The impedance of the current coils such as measuring -

2021-3-20Principles of using current transformers
1) The wiring of the current transformer should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, and the secondary winding should be -

2021-3-19Calibration steps of current transformer error curve
⑴Calculate the multiple of the primary current flowing through the current transformer according to the type of protection device. ⑵According to the model, transformation ratio and primary current mul -

2021-3-18Changes in current transformers
The current transformer ratio should be selected according to the primary load calculation current IC. The standard ratio of the primary side rated current of the current transformer (such as 20, 30,


