What are the safety precautions for installing open-type instrument transformers?

Jul 31, 2026|

I. Pre-operation Safety Preparations
Operators must be certified and wear full protective gear, including insulated gloves, insulated shoes, and goggles.

Confirm the work environment in advance. Live work is strictly prohibited in damp, dusty, or rainy weather.

Two-person coordination is mandatory: one person operates and the other supervises throughout the process. Single-person operation is prohibited.

II. Safety Control During Installation
Before installation, ensure the secondary side wiring is properly connected. Maintain a zero-circuit on the secondary side throughout the entire process to prevent the generation of thousands of volts of high voltage.

Maintain a safe distance of at least 0.7 meters from live parts during operation. Direct contact with exposed live parts is strictly prohibited.

During installation, ensure that no impurities or dust fall into the cut surface of the iron core to avoid affecting measurement accuracy or even causing equipment malfunction.

Low-voltage 380V lines can be operated normally; high-voltage lines must use professional insulated tools of the corresponding grade.

III. Post-installation Verification and Confirmation
After installation, use a multimeter to test the secondary side to confirm there are no open circuits.

Check that the current transformer is securely fixed and tighten it with nylon cable ties to prevent slippage during operation.

In high-voltage scenarios, reliable grounding must be completed, and all wiring terminals must be confirmed to be secure and not loose.

How to Replace an Unsuitable Current Transformer

Send Inquiry