What should I do if the current transformer is damp?

Jul 07, 2025|

1. Drying treatment
Vacuum drying method: Place the damp current transformer in a vacuum drying device and remove the internal moisture by vacuuming and heating. This method can effectively remove moisture from the insulating material and restore its insulation performance.
Hot air drying method: Use hot air drying equipment to heat and blow the damp current transformer to remove moisture. It should be noted that the temperature should be strictly controlled during the drying process to avoid secondary damage to the transformer.
2. Replace the insulating material
If the moisture is serious, the insulation performance may not be fully restored by drying alone. At this time, the damaged insulating material needs to be replaced. This usually requires professionals to disassemble and reassemble.
3. Sealing treatment
Check the sealing performance: Check the sealing performance of the current transformer and repair or replace damaged seals. Aging or damage to the seal may cause external moisture to invade the interior, so it needs to be replaced in time.
Filling with dry gas: Fill the transformer with dry gas, such as nitrogen, to further prevent moisture intrusion.
4. Regular maintenance
Establish a regular inspection and maintenance system: timely discover and deal with potential moisture problems. Non-contact detection can be carried out using infrared thermometers and other equipment to detect abnormal temperature rise in time.
Regular calibration: According to relevant standards and regulations, the current transformer should be calibrated regularly, and a comprehensive calibration should be carried out every 3-5 years.
5. Preventive measures
Strictly control the production environment: During the production process of the transformer, the temperature and humidity of the environment should be strictly controlled to avoid assembly in a high humidity environment.
Improve sealing performance: Use high-quality sealing materials and processes to ensure the sealing performance of the transformer. Check the sealing condition regularly and replace aging or damaged seals in time.
Selection of installation location: Try to install the transformer in a dry and well-ventilated environment to avoid direct exposure to the outdoors or in a humid environment.
Use moisture-proof materials: Filling the transformer with desiccant or using moisture-proof materials can effectively reduce the risk of moisture.

Hall Effect Current Sensor For Power Electronics Testing And Measurement LO-HAOL-EK

Send Inquiry