LO-CTLS2-300A Flexible rogowski coil with integrator 300A-DC20mA
Flexible Rogowski coil current sensor is used to measure AC current, especially high current. Because of its flexible characteristics, it can be used to measure the conductor current with large size (such as conductor diameter ≥30cm) or irregular shape or narrow space between conductors (for example, when the traditional clamp current probe can not measure, the flexible Rogowski coil current sensor can be used to measure conveniently).
- Product Introduction
Wuxi Liou Electronics Co.,Ltd is one of the leading manufacturers and suppliers of lo-ctls2-300a flexible rogowski coil with integrator 300a-dc20ma in China. Our factory offer high quality customized products made in China with low price. Welcome to contact us for quotation.
Flexible rogowski coil with integrator 300A-DC20mA
P/N: LO-CTLS2-300A
Product Description:
Flexible Rogowski coil current sensor is used to measure AC current, especially high current. Because of its flexible characteristics, it can be used to measure the conductor current with large size (such as conductor diameter ≥30cm) or irregular shape or narrow space between conductors (for example, when the traditional clamp current probe can not measure, the flexible Rogowski coil current sensor can be used to measure conveniently). The former is plug-in type, which is used for temporary measurement of portable instrument or current, and for on-line long-time measurement of current. lt is easy to install without damaging the conductor.

Technical parameters
- Maximum withstand voltage:0.66kv (customized for special requirements)
- Rated primary current: 300A
- Rated secondary output: 4~20mA (D.C) with integrator
- Accuracy: 0.5%
- Rated auxiliary power supply: DC12V
- Rated power consumption: <=10W, working frequency 1HZ-1MHZ
- Note: 1. Other specifications can be customized according to the specific requirements of customers.
Electrical specifications
|
Electrical specifications |
|
|
10%-100% Accuracy |
+/-0.5% |
|
Phase error |
W ± 1° (45-65HZ) W±10° (20KHZ) |
|
10%-100% Linearity |
0.50% |
|
Integrator power supply |
12VDC |
|
Response bandwidth |
1HZ-1MHZ |
|
Coil section diameter |
W7.8mm |
|
Cable length |
2M or Custom made |
|
Altitude |
2000M |
|
IP Protection level |
IP65 |
|
Texture of material |
Silicon rubber |
|
Secondary lead |
Shielded wire, length customized |
|
Dielectric strength |
7KVAC/min |
|
Insulation resistance |
DC500V/100M |
|
P/N |
INPUT (A) |
Output |
Accuracy |
DIMENSIONS(mm) |
|
|
Φ1 |
Φ2 |
||||
|
LO-CTLS2 |
0-300KA |
100mV 50mV 4-20mADC 0-5V 0-1A Customized |
1.0 5.0 |
80 |
7.8
|
|
100 |
|||||
|
150 |
|||||
|
200 |
|||||
|
300 |
|||||
|
400 |
|||||
Dimensions:

Wuxi Liou Electronics Co Ltd
Hot Tags: LO-CTLS2-300A Flexible rogowski coil with integrator 300A-DC20mA, China, manufacturers, customized, quotation, low price, made in China
You Might Also Like











