High‑Precision Hall‑Effect Current Sensor For Electric Vehicle Charging Stations LO-CL2A-300
The LO-CL2A-300 series is a high-precision, closed-loop Hall effect current sensor based on magnetic balance technology. Designed for industrial applications, it delivers exceptional accuracy (±0.3%) and linearity (±0.1%) in measuring DC, AC, and pulse currents up to ±500A. With 100kHz bandwidth and 1μs response time, it ensures reliable performance in dynamic power systems.
- Product Introduction
Wuxi Liou Electronics Co.,Ltd is one of the leading manufacturers and suppliers of high‑precision hall‑effect current sensor for electric vehicle charging stations lo-cl2a-300 in China. Our factory offer high quality customized products made in China with low price. Welcome to contact us for quotation.

High‑Precision Hall‑Effect Current Sensor for Electric Vehicle Charging Stations
P/N:LO-CL2A-300
Description:
The LO-CL2A-300 series is a high-precision, closed-loop Hall effect current sensor based on magnetic balance technology. Designed for industrial applications, it delivers exceptional accuracy (±0.3%) and linearity (±0.1%) in measuring DC, AC, and pulse currents up to ±500A. With 100kHz bandwidth and 1μs response time, it ensures reliable performance in dynamic power systems.
Product Features:
- Excellent accuracy
- Very good linearity
- Optimized response time
- No insertion losses
- High immunity to external
- interference
- Low temperature drift
- Wide frequency bandwidth
Application:
- AC variable speed and servo motor drives.
- Uninterruptible Power Supplies (UPS).
- Static converters for DC motor drives.
- Power supplies for welding applications.
- Battery management.
- Wind energy inverter.
|
Electric Specifications |
||||||
|
ITEM |
SYMBOL |
UNIT |
MIN |
TYP |
MAX |
COMMENT |
|
Primary nominal rms current |
IPN |
A |
-300 |
300 |
||
|
Primary current, measuring range |
IPM |
A |
-500 |
500 |
||
|
Measuring resistance |
0 0 0 0 0 0 |
35 6 54 17 85 36 |
@±12V,85℃, ±300A @±12V, 85℃, ±500A @±15V,85℃, ±300A @±15V,85℃, ±500A @±20V,85℃, ±300A @±20V,85℃, ±300A |
|||
|
RM |
Ω |
|||||
|
Secondary nominal rms current |
ISN |
mA |
-150 |
150 |
||
|
Secondary coil resistance |
RS |
Ω |
27 35 |
@ 25℃ @ 85℃ |
||
|
Secondary current, measuring range |
IS |
mA |
-250 |
250 |
||
|
Number of secondary turns |
NS |
2000 |
||||
|
Theoretical sensitivity |
Gth |
mA/A |
0.5 |
|||
|
Supply voltage |
VC |
V |
±12 |
±20 |
@ ±5% |
|
|
Current consumption |
IC |
mA |
25+Is |
|||
|
Zero offset current |
IO |
mA |
-0.2 |
0.2 |
||
|
Thermal drift of offset current |
IOT |
mA |
-0.3 |
±0.1 |
0.2 |
@ -40℃~85℃ |
|
Residual current@ IP=0 after 3xIPN |
IOM |
mA |
-0.1 |
0.1 |
||
|
Sensitivity error |
ƐG |
% |
-0.2 |
0.2 |
Exclusive of I OE |
|
|
Linearity error 0…IPN |
ƐL |
% of IPN |
-0.1 |
0.1 |
Exclusive of I OE |
|
|
Accuracy @ IPN |
X |
% of IPN |
-0.3 |
0.3 |
Exclusive of I OE |
|
|
Response time@ 90% of IPN |
Tr |
us |
0.5 |
1 |
||
|
Frequency bandwidth (-1dB) |
BW |
kHz |
100 |
|||
Instructions
1.Incorrect wiring may cause the damage of sensor.
2.When the measured current through the center hole of the sensor, the current will be measured at the output end.
3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
4.User can adjust the output extent of sensor if necessary.
5.Rated input current and output voltage of sensor can be customized.
Standards
- IEC61010-1
- EN50178
- IEC61800-5-1
- UL94V-0
- RoHS Reach
|
Operating Conditions |
|||
|
Value |
Unit |
Symbol |
|
|
Operating temperature |
-40℃~+85℃ |
℃ |
TA |
|
Storage temperature |
40℃~+100℃ |
℃ |
TA |
|
Weight (Appro) |
120 |
g |
M |
Dimensions:

Connection Schematic:

Insulation performance:
|
Parameter |
Symbol |
Unit |
Value |
Comment |
|
RMS voltage for AC insulation test @ 50Hz,1min |
Vd |
kV |
3.8 |
According to IEC 61010-1 |
|
Impulse withstand voltage 1.2/50µs |
VW |
kV |
8.1 |
According to IEC 61010-1 |
|
Clearance (PRI-SEC) |
dCI |
mm |
10.5 |
|
|
Creepage distance (PRI-SEC) |
dCp |
mm |
10.8 |
|
|
Plastic case |
- |
- |
UL94-V0 |
|
|
Comparative tracking index |
CTI |
PLC |
3 |
Wuxi Liou Electronics Co Ltd
Hot Tags: high‑precision hall‑effect current sensor for electric vehicle charging stations lo-cl2a-300, China, manufacturers, customized, quotation, low price, made in China, Closed Loop Hall Effect Sensors, Hall Effect Sensor, Closed Loop Hall Effect High Current Sensor














