Current transformer operation, maintenance and inspection
Oct 04, 2023| 1) Regularly check whether the current transformer is overheated, check whether there is discoloration of the wiring terminals, and check whether there are sundries in the terminal box.
2) Check the oil level gauge promptly for oil leakage to ensure that the oil level reaches the usage standard and there is no oil leakage. Clean the porcelain part thoroughly to prevent discharge and rupture.
3) Regularly inspect the insulation condition of the current transformer, and at the same time check the oil quality of the oil-filled current transformer, and drain the oil according to the actual situation.
4) When checking the ammeter, comprehensively check its three-phase indication values to prevent overload operation and ensure that it is within the specified range.
5) Carefully check whether the secondary side grounding wire is in good condition to ensure that it is not broken, fix its loose parts, and the secondary side of the current transformer in operation must not be open circuited.
6) Check the output current. If there is a large current, check whether there are any alarm signals such as wire breakage and differential current crossing.
7) Check the reliability of the current transformer grounding.
8) Make sure that the operating temperature of the current transformer is below 50°C.
9) If factors such as overvoltage or moisture cause insulation breakdown in the current transformer, the damaged current transformer needs to be repaired as it is.
10) After the current transformer is repaired, it needs to be tested in time. Only after the inspection meets the requirements can it continue to be used.


