-

2019-4-08Characteristics and scope of split core current transformers
The split core current transformers is simple in structure, easy to install and easy to operate. It can be used not only for AC motors, lighting equipment, air compressors, heating and ventilation, bu -

2019-4-06Installation of zero sequence current transformer and its difference from ord...
The basic principle of the zero sequence current transformer is the same as that of the ordinary transformer. The main difference is that the method is different. The zero sequence current transformer -

2019-4-04Relevant factors to consider when selecting split core current transformers
When selecting an split core current transformers, it is necessary to select the corresponding specification product according to parameters such as primary current and bus cross section. A wire passe -

2019-4-02Zero Sequence Current
Definition: The unbalanced current flows in the circuit during the earth fault is known as the zero sequence current or the DC component of the fault current.The zero phase sequence means the magnitud -

2019-3-30What factors affect the CT’s accuracy
The accuracy of a CT is affected by a number of factors including -

2019-3-28Difference between metering and protection current transformers (CTs)
Current transformers are used for both measurement and protection purposes. -

2019-3-26Current Transformer Cores for Power System
Current transformer of power system plays an important role in providing a current in its secondary winding proportional to the alternating current flowing in its primary. -

2019-3-23Current Sensing Element- Sense resistor
Current sensing refers to generation of the voltage signal which is related to the current passing in the circuit. A conventional way of sensing current is to insert a resistor in the path of current -

2019-3-21What is a Ground Fault
A ground fault is an inadvertent contact between an energized conductor and ground or equipment frame. -

2019-3-19Saturation state and manufacturing method of Residual Current Sensor
The excitation current of the primary circuit of the Residual Current Sensor is very small, and it needs to work under the condition of weak magnetic field during operation. -

2019-3-17Different conversion principles and control methods of Split Core Current Tra...
In the process of operation, the Split Core Current Transducer converts a large current into a small current of the same frequency in phase to facilitate measurement or isolation. -

2019-3-15Normal operation and isolation of precision current transformers
When measuring the high current of the alternating current, the precision current transformer needs to be converted into a relatively uniform current in order to facilitate the measurement of the seco


