-

2019-5-20The use of power current transformer and their accuracy
The power current transformer is an important secondary device in the power system. It is widely used in secondary circuits such as measurement, measurement and relay protection. In the case of high c -

2019-5-17Indicators to be concerned when selecting DC residual current sensor
The DC residual current sensor is an electronic component. It is used in different industries and has different key indicators. It is generally necessary to determine whether DC current, pulse current -

2019-5-15Installation precautions for open zero sequence current transformer
The zero-sequence protection device of the substation and the open-close station line adopts more and more open zero sequence current transformer. It should be installed on the bottom of the switch ca -

2019-5-13The role of the toroidal current transformer and its core structure
The toroidal current transformer acts as one of the current transformers. Its function is also to convert the primary current through a certain ratio into a secondary current with a small value for pr -

2019-5-11Multi core current transformer structure principle and core grounding detection
The structure of the multi core current transformer is relatively simple, and consists of a primary winding, a secondary winding, a core, and a frame, a casing, and a terminal block insulated from eac -

2019-5-09Power current transformer winding method and model definition
When the power current transformer is wound, the current ratio of the transformer should be determined according to the size of the load, and then the primary line should be wound from the center of t -

2019-5-07The characteristics of single phase current transformer and its safety detection
The single phase current transformer is suitable for indoor and outdoor use. The epoxy resin is fully enclosed and potted, and the two sides are tightened by fixing screws. It is suitable for multi-fu -

2019-5-06Protection requirements and current measurement for mini split-core current t...
Mini split-core current transformer are more suitable for current measurement, signal sampling and microcomputer protection of 10KV AC power system electrical equipment when in use. -

2019-5-05Grounding requirements for clamp on current transformer and magnetic potential
When using the clamp on current transformer, it is necessary to select the appropriate ratio according to the current to be measured. Otherwise, the error will increase. When using the secondary side, -

2019-5-04Protection principle and protection action of zero sequence current transformer
The zero sequence current transformer is used in conjunction with the relay protection device or signal when the power system generates zero-sequence ground current during use, so that the device comp -

2019-5-03Operation process and range inspection of open zero sequence current transformer
The AC terminal of the open zero sequence current transformer has poor contact between the screw and the crimping screw hole. It is in a half-open state when it is used, and the metal terminal of the -

2019-5-02Demagnetization requirements and maximum current of split core current sensor
In the case of a sudden drop in current during the operation of the split core current sensor, the transformer core may generate residual magnetism. In the course of operation, if the current transfor


