The difference between ordinary current transformer and zero sequence current transformer
Jun 14, 2023| 1. The role of ordinary current transformers
Ordinary current transformers can convert the primary current with a large value into a secondary current with a small value through a certain transformation ratio, which is used for protection, measurement and other purposes. For example, a current transformer with a transformation ratio of 400/5 can convert the actual 400A current into a 5A current.
2. Working principle of zero sequence current transformer
The basic principle of zero-sequence current protection is based on Kirchhoff's current law: the algebraic sum of the complex current flowing into any node in the circuit is equal to zero. When the line and electrical equipment are normal, the vector sum of the currents of each phase is equal to zero. Therefore, the secondary side winding of the zero-sequence current transformer has no signal output, and the actuator does not operate. When a ground fault occurs, the vector sum of the currents of each phase is not zero, the fault current causes magnetic flux to be generated in the ring iron core of the zero-sequence current transformer, and the induced voltage on the secondary side of the zero-sequence current transformer makes the actuator act and drive The tripping device switches the power supply network to achieve the purpose of ground fault protection.
3. Function of zero sequence current transformer
When an electric shock or leakage fault occurs in the circuit, the protection will act and cut off the power supply.
4. Conditions of use of zero-sequence current transformers
A current transformer can be installed on each of the three-phase lines, or a zero-sequence current transformer can be passed through the three-phase wires together, or a zero-sequence current transformer can be installed on the neutral line N to detect three-phase The current vector sum of .


