-

2021-5-15What is the cause of the old burning of the Power Current Transformer
The first reason is that the secondary side of the Power Current Transformer is caused by an open circuit due to the weak wiring In the process of using the Power Current Transformer, if the secondary -

2021-5-14Wiring principles and rules of Power Current Transformer
(1) No open circuit is allowed on the secondary side of Power Current Transformer. The secondary open circuit may have serious consequences, one is that the iron core is overheated, and even the trans -

2021-5-13What is the role of Power Current TransformerCT
Since the full-scale current of the meter head is 5A, the different indication scales on the dial surface indicate the line current, so when the current on the line exceeds the maximum current allowed -

2021-5-12Common faults and treatment methods of Power Current Transformer
1. Overheating has occurred. Power Current Transformer has overheating, smoking, glue flow, etc., which may be caused by poor connection of the primary side wiring, severe oxidation of the surface of -

2021-5-11What are the precautions for using Power Current Transformer
(1) First of all, Power Current Transformer is marked by minus polarity. If the polarity is connected incorrectly, it will not only affect the current measurement value, but also cause a short circuit -

2021-5-10Operational requirements of miniature current transformers
First of all, the miniature current transformer must not exceed the rated capacity for long-term operation. This is because long-term overload, that is, the passing current exceeds the rated current o -

2021-5-08Analysis of Influencing Factors of Miniature Current Transformer Error
The influencing factors of the error mainly include four aspects: 1. The internal parameters of the current transformer; 2. The size of the iron core section; 3. The number of turns of the coil; 4. Th -

2021-5-07Common faults of Electrical Current Transformer
1. The thickness of the insulating part of the Electrical Current Transformer is relatively large. There are also wrinkles between the insulating layers, the insulating part is wrapped and loose, and -

2021-5-06Principle of Electrical Current Transformer to achieve zero magnetic flux
1. The meaning of Zero Flux Electrical Current Transformer The error of the Electrical Current Transformer is caused by the alternating excitation current that provides the magnetic flux. If the magne -

2021-5-05Matters needing attention during operation of miniature current transformer
The secondary side of the Electrical Current Transformer must not be open during operation. Once the secondary side is open, it will be burned due to excessive iron loss and high temperature, or the v -

2021-5-04What is the wiring fixing principle of miniature current transformer
1)The wiring of the Electrical Current Transformer should follow the series principle: the primary winding should be connected in series with the circuit under test, and the secondary winding should b -

2021-5-03Wiring principle of current transformer
1. No open circuit is allowed on the secondary side of the current transformer The secondary open circuit may have serious consequences. One is that the iron core is overheated and even the transforme


